Tuesday, June 18, 2013

Leixen VV-808: Disassembly

1. Remove the knob for the rotary encoder by pulling straight forward. Mine was very tough to remove.
2. Remove the three screws from the front face plate.
3. The face plate is connected to the main board via a ribbon cable, so gently pull the face plate forward.
4. Remove the four screws from the main part of the radio.
5. Lift the cover straight up.

At that point, all the easy stuff is done.

In my radio, the board with the display is marked:

LEIXEN
R1500-DISP-C
2012-3-31

The main board is marked:

LEIXEN
R1500-A4B
2012-08-06


No comments:

Post a Comment