Monday, December 12, 2011

Baofeng UV-3R: Software Version 1.10 (UV-X4)

Mike, G0CVZ, alerted us to version 1.10 of the Baofeng UV-3R/UV-X4 software.

You can go to the Vero Telecom Download page and look for "Dual Band Pocket Radio UV-X4(Dual Watch) New Version" or you can use this direct link.

This version also uses the .3R file type.



The most notable update is the ability to update the FM Broadcast memories. Click "Program" the "FM Freq."


11 comments:

  1. Link is broken, and program won't download from that site either. Anywhere else to find this program?

    ReplyDelete
  2. Even going to the main http://www.verotelecom.com/ gives an error. I suspect it will be back in a bit.

    Looks like you can find the file here:
    http://www.maintradingcompany.com/main/page_downloads.html

    ReplyDelete
  3. Ir really works? I can´t see the frequencies I have in te walkie from the software even more I can´t store the frequencies of the program in the talkie

    ReplyDelete
  4. It really works? I can´t see the frequencies I have stored in the walkie from the software even more I can´t store the frequencies of the program in the talkie

    ReplyDelete
  5. Yes it works. Have you set the com port in the program to whichever one the serial USB programming cable is using?

    ReplyDelete
  6. I can´t write Channel names. Whats wrong?

    ReplyDelete
  7. Im able to read from the radio, but when I try to write to the radio I receive an error box and it just says Not Found. Almost at my wits end.

    JBR97@aol.com

    ReplyDelete
    Replies
    1. i found you need to have data programmed in memory 1 before it will program the radio from the software
      also remove the antenna as no receive must also be happening when trying to write memories

      Delete
    2. is your com port software matching the hardware.

      to check go to control panel system tab and set it under ports to match radio software.
      for your particular adapter you may have to reboot after making the change

      Delete
  8. won't let me make any changes won't save in notepad to file any ideas?

    ReplyDelete