Showing posts with label TH-9000D. Show all posts
Showing posts with label TH-9000D. Show all posts

Wednesday, July 23, 2014

TYT TH-9000D: Problems

Russell ‏(@nitro1963) passed along the following via Twitter about the TH-9000D:
when u put in repeater inputs eg 477.350 then change power level the input changers to 483.350
some will not clone . Audio recieve level is lower. If your only going to use the radio on simplex it may be ok for some people
after you programe repeater channels in they should not change after programming input 433.625 output 438.625 eg 
many people having problems with the D model tyt th9000D 
iv programmed many tyt th 9000 never had a problem until the D model came out 
they have changed the wiring on the mic from the 9000 to the 9000D not compatable now
Any other readers having problems?

Wednesday, May 28, 2014

TYT TH-9000D: At 446Shop

I was looking at some of the stuff Nate sent me and I just happened to notice that the 446Shop has a listing for the TYT TH-9000D. Pictures at the link.

TYT TH-9000D: Mono-band Mobile reports the TH-9000 is being replaced by the TH-9000D. It will come in three flavors (2M, 220, and 440) and cost around $150.

From the TYT site:

■  Frequency Range: VHF:136-174MHz / 245-245.9875MHz (220-260MHz) / UHF: 400-480MHz
■  Output Power: VHF: 10W/25W/60W / UHF: 45W/25W/10W
■  8 group's of scrambler
■  1750Hz Tone
■  CTCSS/DCS setting & scanning
■  0-9 SQL grade setting
■  Frequency/Channel scanning
■  High/Mid/Low power selectable
■  Voice compander
■  Repeater offset shift
■  Keypad lock function
■  Contact book
■  Battery voltage display
■  DTMF/2 tone/5 tone
■  Remote kill/ stun/ activate/ revive
■  Emergenvy alarm
■  Wide/Narrow band setting
■  TX inhibit
■  Busy Channel Lock-Out
■  Channel name editing
■  Reverse frequency
■  Talk around
■  Scrambler(Optional)
■  Voice prompt
■  Time-out Timer
■  Auto Power off
■  VFO step setting:5/6.25/10/12.5/20/25/50kHz